This high resolution colour camera, further to the standard composed video output, is provided also with two RJ-45 port to be connected to TCP/IP networks. So the installation is extremely easy if a network is already cabled. Based on MPEG-4 compression with CIF resolution. Through the software provided, it is possible to make all the compression settings, recording on a remote PC according to different modes, visualising the pictures or sending e-mail. It is also equipped with an input/output alarm interface and a RS-485 port. This camera is provided with a power supply. Lens not included.

1/4" CCD colour day&night speed dome camera. Provided with very good colour yield and laying precision. It is suitable for all the cases where the videosurveillance of wide places is necessary, thanks to the function Pre-set (128), Group (6) and Swing (2) manageable and programmable through AT6SD keyboard (by RS-485 twisted line). Equipped with optical (23x) and digital zoom (10x). Rotating angle: PAN: 0°-360° endless, TILT: 0.7°-90°. Adjustable rotating speed: 0.7°/sec-180°/sec. The item is provided with outdoor housing, wall bracket and 24Vac power adaptor. Product available until stock lack.

TXWEB/1 transmitter allows to be connected to a video signal from any CCTV device, even existing. In this way it is possible to display the video signal by a remote PC through the TCP/IP network connection. Based on MPEG-4 compression with CIF resolution, by the provided software, it allows to make all the settings related to resolution, frame rate, PC recording (on various mode), image displaying or e-mail sending. It is also equipped with 2 input/output alarm interface and a RS-485 port. The product is provided with a power supply. Product not available any more.

Colour camera with reduced dimensions, equipped with 1/3" CCD sensor. In day time it provides a colour image. When the light decreases the image provided is B/W and a photocel turns on the 12 infrared LED in order to increase the sight possibilities. It can be installed in outdoor (IP67 protection degree). It is provided with bracket and sunvisor. Out of production.

High resolution colour 1/3"" CCD camera with interchangeable lens, 230 Vac powered. Conceived for installations requiring high performance. Suitable for amplified or non-amplified autoiris lens, provided with Back Light Compensation (BLC) System. Lens not included. Out of production.

Medium resolution colour 1/3"" CCD camera with interchangeable lens, 230 Vac powered, conceived for installations requiring high performance. Suitable for autoiris amplified or non-amplified lens, provided with Back Light Control (BLC) Systems. Lens not included.

High resolution B/W 1/3"" CCD camera with with interchangeable lens. Conceived for installations requiring high performance. Suitable for autoiris or non-autoiris lens. Lens not included. Product not available any more.

Medium resolution b/w 1/3"" CCD camera with interchangeable lens. Conceived for installations requiring high performance, suitable for autoiris or non-autoiris lens. Lens not included.Product available until stock lasts.

The intercom PT510WDG is an audio station of Project series belonging to digital system FN4000.Being already encoded it allows the direct connection to the FN4000 cabbling and it reassumes on the whole the features of the decoder 4231TP and the handset PT510EW. It is equipped with door lock release key and spiral cord. Conceived for installations with essential functionalities it guarantees the great part of the fundamental performances of the decoder 4231TP to exception of additional services as the floor call, the connection in parallel of another intercom, the generation of anti panic call to the concierge desk and the command AE.

Within Matrix series MA93 is an accessory that allow the mounting where the insertion inside the wall is not in demand. This rain shelter is for three modules for installation, where surface mounting is strictly required, in vertical alignment. This item is manufactured in stainless steel of right thickness and suitable dimensions. It is quite solid and it permits the mounting with the simple and direct fixing of the function modules and of the frame MA63 as element of finish.